|
|
|||||||||||
| EQUIPMENT LIST | |||||||||||
| LIST | |||||||||||
| Mid 80's Muller Minuteman stitcher complete with six 1516 feeders, 1528 cover feeder, one hand | $46,750.00 | ||||||||||
| feed station, 1509 stitcher with three rebuilt heads, 217 Heavy Duty 3-knife trimmer with two sets | REDUCED | ||||||||||
| of knives, standard delivery unit with batch counter. Ready for demo or delivery. | |||||||||||
| Unit in A-1 condition with lots of new parts. | Add: 2 more feeder - Total of 8 pockets | $52,750.00 | |||||||||
| 1996 Stahl ST-90 Stitcher complete with 6 pockets, cover feeder, three stitcher heads, 3-knife | $39,500.00 | ||||||||||
| trimmer with two sets of knives, and standard delivery unit. | |||||||||||
| Under power on Customer's floor. Must be moved ASAP. | |||||||||||
| 1989 Polar 115-EMC-MON 45" Programmable cutter. Complete with large air side tables, air bed, | $32,500.00 | ||||||||||
| two knives, 12 sticks, jogging block, tool kit, books. Cleaned and serviced with new drive belts, | REDUCED | ||||||||||
| new filters and oil. | |||||||||||
| NEW Baum Cut Model 31.5 Built By Polar Fully programmable 31 1/2" Cutter with two knives, | $27,495.00 | ||||||||||
| air bed, 12 sticks, jogger block, tool kit, and books. Two year parts warranty. | |||||||||||
| On our floor ready to deliver. | |||||||||||
| NEW Baum K-20 Knife fold unit. Same as Stahl VFZ-52. Complete for folding in line with folders | $19,500.00 | ||||||||||
| or as a refold unit on saddle stitchers. 2-year parts warranty. Heidelberg sales for approx. $25k | |||||||||||
| In stock as JAS - List $20,500.00 | |||||||||||
| MUST SELL!!! - NEW!!! - PRICE REDUCED!!!! | $82,500.00 | ||||||||||
| New Baum B-30 4/4/4 Continuous feed 30x50 with low profile feeder, built in batch counter, top | |||||||||||
| plates hinged deflector, bottom plates 0-make ready. All with micro adjutments. Complete with all | |||||||||||
| basic parts and supplies. 3Year parts warranty. See live at JAS. Ready to deliver. | |||||||||||
| 1996 TD-66 26x40 6/6/4 Continuous feed high-speed, heavy duty machine with low profile feeder with | $62,500.00 | ||||||||||
| digital control and built in batch counter, zero make ready fold paltes with micro adjustments | |||||||||||
| Totally reconditioned and complete with delivery table. 60-day parts warranty. | |||||||||||
| Note: 6-plate main and 8-page units - very hard to find. Cost over $135k new. | |||||||||||
| 1990 Stahl TC-78 30x40 4/4/4 Continuous feed with low profile feeder, zero make ready fold plates | $35,000.00 | ||||||||||
| with micro adjustments. High speed machine with potentiometer speed control on each unit. Totally | |||||||||||
| reconditioned one year ago. Used very little 60-day parts warranty. | |||||||||||
| 1998 Stahl TD-66 4/4/4 Continuous feed (26x40) High speed, heavy duty machine with low profile | $49,750.00 | ||||||||||
| feeder and digital control, built in batch counter, hinged deflector fold plates with micro adjustments. | |||||||||||
| Totally reconditioned and complete with warranty. (Cost $100k new) | |||||||||||
| 2001 Stahl TI-55 4/4 Continuous feed (22x35) High speed digital control, low profile feeder, built in | $28,750.00 | ||||||||||
| batch counter, zero make ready plates with micro adjustment Reconditioned with warranty and roll | |||||||||||
| away delivery table with new belts. Like new. | |||||||||||
| 1992 TF-78 4/4/4 Continuous feed 30x50 with batch counter, separate plates and deflectors, | $37,500.00 | ||||||||||
| preslitter shafts on main unit. Totally reconditioned with all basic parts and supplies. | |||||||||||
| Warranty included | |||||||||||
| 1992 TF-66 4/4/4 Continuous feed 26x40 with batch counter, hinged deflector plates. | $37,750.00 | ||||||||||
| Totally reconditioned with all basic parts and supplies. Includes warranty. | |||||||||||
| 1986 Stahl TF-66 26x40 4/4/4 Continuous feed with batch counter. Totally reconditioned and | $29,500.00 | ||||||||||
| complete with warranty. Nice folder. | |||||||||||
| 1988 TF-66 4/4 Continuous feed with delux batch counter, hinged deflector plates in main unit. | $21,500.00 | ||||||||||
| 1985 8-page separate plates and deflectors. Totally reconditioned and complete. Ready to run. | |||||||||||
| 1988 TF-66 26x40 4/4 Pile feed with batch counter, hinged deflector fold plates. Reconditioned | $18,500.00 | ||||||||||
| and comlete. Like New. Sold as new in 1993. | |||||||||||
| 1989 Stahl TF-56 4/4 Pile feed with deluxe batch counter, hinged deflector plates with micro | $19,750.00 | ||||||||||
| adjustments. Complete with all basic parts and supplies. Mint condition. Semi reconditioned | |||||||||||
| with recovered rollers and collars and new belts. | |||||||||||
| 1999 Stahl USA B-20 4/4 Pile feed with built in batch counter, zero make ready fold plates. Like | $21,000.00 | ||||||||||
| new condition. Cleaned and serviced. Complete with tool kit, new perfs, scores, and slitter blades. | |||||||||||
| Includes books and parts warranty. | |||||||||||
| 1998 B-120 4/4 Continuous feed 20x32" with built in batch counter, model A-56 roll away delivery | $21,750.00 | ||||||||||
| table. Very clean and complete with lots of spare parts. 30-day parts warranty. | |||||||||||
| Add: 1997 MBO 4-plate 16-page Model B123-3-15/4 with folder | $ 7,000.00 | ||||||||||
| 1987 Stahl TX-52 4/4 Pile feed 20x32 with batch counter, hinged deflectors. Complete and | $19,500.00 | ||||||||||
| reconditioned with all rollers, pullout collars recovered. New roller bearings, springs, shims, | |||||||||||
| drive belts, vs pulley belts, guide belt, and cross carrier v belts. Includes tool kit, parts/operators | |||||||||||
| books. New perf, score, and slitter blades. 30-day parts warranty. | |||||||||||
| 1999 Stahl USA B-20 4/4 Pile feed with built in batch counter, zero make ready fold plates. Like | $16,500.00 | ||||||||||
| new condition. Cleaned and serviced. Complete with tool kit, new perfs, scores, and slitter blades | |||||||||||
| Includes parts/ operators' books and 30-day parts warranty. | |||||||||||
| 2002 Stahl TI-36 4/4 Pile feed 14x25 with touch pad control, built in batch counter, small work | $29,750.00 | ||||||||||
| conveyor. Complete and in new condition. 90-day parts warranty. Cost over $45k new. | |||||||||||
| 2002 Stahl STA-30-F-MKE Miniature vertical stacker with batch counter. New condition. | $7,500.00 | ||||||||||
| 1989 T-36 6/6 Pile feed with batch counter, quick sets, and small work conveyor. Completely | $29,500.00 | ||||||||||
| reconditioned with all rollers and pullout collars recovered. All new bearings, belts, shims, springs | |||||||||||
| slitter shaft stub shafts, couplers, and bearings. Reconditioned hang on delivery table. | |||||||||||
| Note: 6-plate main and 6-plate 8-page units are hard to find. | |||||||||||
| 1989 T-36 4-plate main unit only. Pile feed with batch counter and quick sets. Reconditioned | $12,500.00 | ||||||||||
| with all rollers and pullout collars recovered. New roller bearings, springs, shims, drive belts, and | |||||||||||
| guide belts. New slitter shaft stub shafts and couplders. Complete with parts and operators | |||||||||||
| books, tool kit, perf, score, and slitter blades with collars. 60-day parts warranty. Very clean. | |||||||||||
| 1987 T-36 4-plate 8-page reconditioned with standars roller setting and small work conveyor. | $7,000.00 | ||||||||||
| 1987 Stahl T-36 4/4 Pile feed with batch counter, small work conveyor, and standard roller | $16,750.00 | ||||||||||
| settings. Reconditioned with all rollers and pullout collars recovered. New roller bearings, | |||||||||||
| springs, shims, drive belts, guide belts, and cross carrier drive belt. New slitter shaft stub shafts | |||||||||||
| and couplers. Complete with parts and operators' books, tool kit, perf, score, and slitter blades | |||||||||||
| with collars. 60-day parts warranty. Totally rebuilt and like new. | |||||||||||
| NEW Baum 714XLT Air feed table top folder with built in counter and rollaway cart. In stock at JAS | SPECIAL | ||||||||||
| $6,500.00 | |||||||||||
| 1995 Baum 714 XE 8-page unit on cart. Complete with delivery unit. Like new. | $2,995.00 | ||||||||||
| 1993 Stahl MKE-66 26" Marking unit complete with batch counter, new, never used. | $5,250.00 | ||||||||||
| NEW Baum/Stahl STA-30-F miniature vertical stacker, will run on most Stahl folders. 2-year | $7,395.00 | ||||||||||
| parts warranty. In stock at JAS. | |||||||||||
| 1998 Stahl VSA66-M-1 vertical pressure stacker with batch counter. Reconditioned with all | $18,750.00 | ||||||||||
| new belts. Complete and nice. | |||||||||||
| 1995 Stahl VSA66-M-1 vertical pressure stacker with batch counter. Reconditioned with all new | $17,000.00 | ||||||||||
| belts. Complete. | |||||||||||
| Stahl VFZ-52-D digital knife unit. Reconditioned and complete. | $12,500.00 | ||||||||||
| Stahl SBP.D.MKE digital pressure stacker. Cleaned and serviced. Nice. | $10,000.00 | ||||||||||
| Stahl SKP-D-66 pressure delivery unit. Digital. Reconditioned and complete. | $8,500.00 | ||||||||||
| 1991 Stahl SB-46 18" Stacker complete with tool kit and paper stop. A-1 condition. | $7,000.00 | ||||||||||
| 1987 SBP.46 18" Pressure stacker cleaned and serviced. Runs good. | $8,950.00 | ||||||||||
| 1996 Stahl Model SKP-D-MKE Pressure stacker with batch counter and shingle delivery. | $8,500.00 | ||||||||||
| Digital control TD style. New motor controller will run on any machine…Stahl, MBO, or Stitcher | |||||||||||
| 2000 Stahl TD-66 8-page with digital control. Complete with zero make ready fold plates with | $12,500.00 | ||||||||||
| micro adjustments. Cleaned and serviced. Like new. | |||||||||||
| 1986 TF-66 4-plate 8-page 26" Totally reconditioned and complete. | $8,750.00 | ||||||||||
| 1986 TF-56 4-plate 16-page 23" Totally reconditioned and complete. | $8,000.00 | ||||||||||
| 1987 Stahl TF-56 2-plate 32-page with hinged deflectors. Reconditioned and complete. | $6,750.00 | ||||||||||
| 1988 Stahl T-50 4-plate 8-page with hinged deflector and microadjustment fold plates, & quick sets. | $7,500.00 | ||||||||||
| Totally reconditioned and complete with all basic parts and supplies. Like new. | |||||||||||
| 1977 Stahl T-107 4/4/4 continuous feed complete. As-is, running on our floor 42" 68" | $14,500.00 | ||||||||||
| Will run full size 32-page forms 35x45 | |||||||||||
| 1976 T-66 Continuous feed main unit only 26x40 complete and in good working order | $6,250.00 | ||||||||||
| Baum 2-plate friction feed. Complete. S/N KEL-0172 Par Pony | $1,500.00 | ||||||||||
| 1984 Baum Model 700 series 4-plate 16-page unit. Complete and like new. 13x20 | $4,000.00 | ||||||||||
| 1986 Baum Model 518B 4-plate 18x20" 8-page with quick sets and combo rollers. Runs good. | $2,500.00 | ||||||||||
| 1987 Baum 500 Series 16-page 13x20 reconditioned with all rollers recovered. | $4,000.00 | ||||||||||
| 1985 Finemore inline punch for folder or stitcher. 1-3-5 hole Complete with delivery. | $6,250.00 | ||||||||||
| 1982 Polar Model 92EMC 36" cutter with air bed, two knives, jogger block, 12 sticks, tool kit, | $14,750.00 | ||||||||||
| and books. Cleaned and serviced. | |||||||||||
| 2002 Challenge 20/20 20" Cutter Complete with two knives, six sticks, tool kit, and books. | $ 6,400.00 | ||||||||||
| New condition. Runs on 110 Volt. | |||||||||||
| 1991 Challenge 20/20 20" Cutter complete with two knives, six sticks, tool kit, and books. | $ 3,750.00 | ||||||||||
| New condition. Runs on 110 Volt. | |||||||||||
| New Interlake Model P multi head stitcher with two heads for flat or saddle stitching. | $8,225.00 | ||||||||||
| New Interlake S3A 7/8 stitcher will work on 2 sheets up to 7/8" for flat or saddle stitching. | $6,876.00 | ||||||||||
| Complete with two five pound spools of stitching wire. | |||||||||||
| New Interlake stitcher model A 1/4" for flat or saddle stitching two sheets up to 1/4" with new | $3,595.00 | ||||||||||
| Magnetek stitching heads. Complete with ten pounds of wire. | |||||||||||
| Acme Morrison HD stitcher complete. Cleaned and serviced. Flat stitch up to 2" | $2,500.00 | ||||||||||
| Bostitch #7 stitcher. Cleaned and serviced. Flat or saddle stitching up to 3/4" | $1,500.00 | ||||||||||
| 1968 Bostitch Model 19E 3/8" floor stitcher for flat or saddle stitching Complete. | $1,350.00 | ||||||||||
| 1989 O&M/ND Multi head drill (up to 5 heads) Complete with three heads, 9 drill bits, drill bit | $4,950.00 | ||||||||||
| sharpener, 36 drill sticks. New condition. | |||||||||||
| 1986 Challenge Model EH3-A 3-hole drill complete with 9 used drill bits, 12 drill blocks, tool kit, and | $3,575.00 | ||||||||||
| parts/operator books. Cleaned and serviced. | |||||||||||
| 1980 Challenge Reconditioned Model EH3-A 3-hole drill comlete with nine used drill bits, 12 drill | $3,250.00 | ||||||||||
| blocks, tool kit, and parts/operator books. Cleaned and serviced. | |||||||||||
| Spinnet One hole drill | $850.00 | ||||||||||
| Bestronic L-Sealer with T-14-8 heat tunnel. Complete system with new belts on Sealer and tunnel | $2,200.00 | ||||||||||
| PalPac Shrinkwrapper with L-Sealer 12x18 and heat tunnel complete system | $1,450.00 | ||||||||||
| Weldotron L-Sealer 20x28 Model 6402 with power take off converyor A-1 Condition | $2,200.00 | ||||||||||
| Stahl 20", 23", 26", & 30" Gate fold systems in stock - Complete | $3,200-3,600 each | ||||||||||
| MBO 20" Gate fold system in stock - complete. | $2,750.00 | ||||||||||
| Rotocrease Units available. All folders Baum, Stahl, & MBO. Complete, score & perf inline. From $3,500-$5,000 | |||||||||||
| New & used Muller stitcher heads. | Call | ||||||||||
| Minuteman Three-Hole and One-Hole punch kits. Complete. | Each | $3,250.00 | |||||||||
| Muller 890 3-Knife trimmer. Complete 4th & 5th knife kit. | $3,750.00 | ||||||||||
| Muller 890 3-hole punch kit. | $3,250.00 | ||||||||||